Speedbox 1.3 B.Tuning For Shimano (Ep8) (Remove Speed Limit)

The "+E-Tube port" variant is intended for e-bikes without a free E-Tube port - usually e-bikes with one of these components:

•    Satellite System ON/ OFF Switch
•    Di2 (electronic gear shifting system)

PROPERTIES:

• Maximum speed: unlimited
• Speed limiter: deactivated
• Activation/deactivation: SpeedBox App/ LIGHTS

Display shows:

•    real values up to 23 km/ h
•    then the actual values are only displayed in the SpeedBox App

Compatible with:

•    motors EP8
•    motors EP8 RS
•    Giant Revolt (up to 35 km/h)
•    SpeedBox App

Not compatible with:

•    Shimano EP801

From the ground up redesigned tuning chip for your e-bike with a Shimano motor – with a new design, completely new hardware and firmware, and Bluetooth technology to connect your e-bike with a mobile app.

SpeedBox 1.3 B.Tuning offers a unique connection between your e-bike and mobile phone. This tuning chip is a top-notch product perfectly optimized for the most powerful ride and experience. It suppresses the speed limiter so you can enjoy your ride at unlimited speed. After pairing with the SpeedBox App mobile application, you will see real riding data on your phone’s display. You may also set the speed limit of your own choice. Monitor and store all the parameters of your trip on the display of your phone in any place, anytime.

Compared to previous versions, this new product also plugs into the engine's E-Tube port. It is therefore necessary that the e-bike motor in which you are going to install the new version of SpeedBox for Shimano has one free E-Tube port. In case you do not have a free E-Tube port in the motor, please select “+E-Tube Port” variant.

E-bikes, which do not have a free E-Tube port, are usually those with a Di2 electronic gear shifting system, or with a tube integrated Satellite System ON/OFF Switch (EW-SW100, EW-SW300).

How does SpeedBox B.Tuning work?

This tuning chip is also very easy to control - via mobile app or by turning on/off the lights. If the lights are turned off, SpeedBox is activated. The chip can be easily deactivated by turning on the lights. A new feature in this SpeedBox version is the possibility of activating the double-click function in the app. By activating this function, the lights become independent of tuning. By double-clicking on the LIGHT button, the lights will flash, and the tuning will turn on. If you double-click on the button again, the tuning will turn off and the e-bike will work the same as without a chip. 

You can set the maximum speed limit in the app.

SpeedBox App for SpeedBox 1.3 B.Tuning

SpeedBox App is an application specially designed for SpeedBox 1.3 B.Tuning, which uses Bluetooth technology to connect your e-bike to your mobile phone. After downloading the application and connecting your mobile phone to your e-bike, you will see current data and trip parameters displayed on your phone. You can store your trips, compare the results with friends and monitor your performance and progress. Thanks to that, you may fully enjoy the ride and leave the performance data analysis for later.

SpeedBox App features:

• Tuning control
• Activating the "double-click tuning control" function
• Speed limit setting
• Saving and viewing your trips

We recommend downloading SpeedBox App to your phone before ordering the SpeedBox 1.3 B.Tuning chip. You can try out our demo version and get to know all the awesome features and, at the same time, make sure that the application is fully functional on your phone. To connect to the SpeedBox B.Tuning chip, your phone needs to be equipped with Bluetooth 4.0 or higher.

Assembly

We use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries.

If you lose your service password or pin, you can use our service available here.

In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.

 

Important Safety & Legal Warning:

• Performance Modification: The SpeedBox tuning chip is designed to update and modify your e-bike’s performance settings—altering speed limits and acceleration curves from the original factory configuration.
• Firmware Updates Risk: Important: Updating your bike’s firmware while the chip is installed can potentially render the chip inoperable. The update process may conflict with the chip’s modified settings, which could permanently “kill” the chip. To avoid this, always remove the chip or consult with a qualified technician before performing any firmware updates.
• Warranty Notice: The installation or use of this product may void your e-bike manufacturer’s warranty.
• Legal Compliance: Using a modified e-bike on public roads, cycling paths, or any area regulated by local laws may be illegal. It is your responsibility to ensure compliance with all applicable laws and regulations in your locality.
• User Responsibility: By purchasing and installing the SpeedBox tuning chip, you acknowledge that you assume full responsibility for any modifications to your e-bike’s performance. We are not liable for any legal consequences, accidents, or damages that may result.
• Professional Installation Recommended: For ensuring safety and optimal performance, this device should only be installed by a qualified technician. Confirm that your bike remains compliant with local safety and traffic laws after installation.

SPEEDBOX

Boost your e-bike’s performance with Speedbox tuning kits, available at Hyper Ride for riders looking to unlock their bike’s full potential. Our selection includes Speedbox 1.0, 2.0, and B-Tuning kits, designed to remove speed restrictions and enhance your electric bike’s capabilities. These kits are easy to install and compatible with various e-bike motors, providing increased speed and power for an exhilarating ride. At Hyper Ride, we offer Speedbox products with fast and reliable delivery across New Zealand, so you can enhance your biking experience without waiting. Shop Speedbox tuning kits today and enjoy the freedom of unrestricted riding, whether you’re commuting or hitting the trails. Experience the thrill of a faster, more powerful e-bike with Speedbox from Hyper Ride.