A very light, puncture-proof and transparent tubeless rim strip that makes tubeless conversions quick and easy.
Strip allows tubeless conversion of most standard bicycle wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex or Végétalex sealant.
- The easiest way to perform a tubeless conversion
- Very light tubeless rim strip
- Damage-resistant
- Long lasting, it can be moved from one wheel to another
- Extended range of widths
"Single" means you get just one Strip, no tubeless valve included
Available Sizes:
Caffélatex Tubeless Strip is available in the following widths:
- S (25 mm): for rims with internal width between 16 and 20 mm;
- M (30 mm): for rims with internal width between 20 and 25 mm;
- L (35 mm): for rims with internal width between 25 and 30 mm;
- Plus S (40 mm): for rims with internal width between 30 and 35 mm;
- Plus M (45 mm): for rims with internal width between 35 and 40 mm;
- Plus L (50 mm): for rims with internal width between 40 and 45 mm.
Each width is available in two length options, to fit different wheel diameters (26”/27,5” or 29”).
Strip Single is just one Strip, no tubeless valve included.
Max pressure for Strip is 7 bar (100 psi), making it suitable also for wider road tyres (starting at 28mm of width).
Note for road and gravel riders looking for the correct Strip for their wheels
- wheels identified as 29" (for mtb), 28" (for road) and 700c have the same rim diameter, 622 mm in ISO/ETRTO standard. Therefore, the right Strip for 700c wheels is 29".
- wheels identified as 27,5" (for mtb) and 650b have the same rim diameter, 584 mm in ISO/ETRTO standard. Therefore, the right Strip for 650b wheels is 26/27,5".
Tubeless conversion, made easy
Caffélatex Strip is the ultimate tubeless solution for very difficult rims (for example, aluminum rims with mat surface finishing, rims with very deep channel, pin-joined rims where the junction is not welded etc.). This because Strip isn’t adhesive: it’s made in one piece and relies on its elasticity to sit tight on the rim.
Please note: sorry, Strip won't work on asymetric rims with off-center valve hole.
To convert a rim to tubeless, simply remove the existing rim-strip, choose the appropriate Strip size and follow the following easy steps:
- (OPTIONAL STEP) Use a roll of electrician tape and seal the spoke holes of the rim. This just in order to create an additional protection to prevent sealant from getting inside the rim inner chamber, in the unlikely case the Strip moves and let some liquid go through.
- Insert a tubeless valve in the hole of Strip, so that the rubber base is in contact with Strip.
- Secure Strip to the rim, tightening the nut on the valve stem. It’s important to push the valve base against the rim while doing so, to achieve a proper air-tightness.
- Keeping the wheel with the valve at 12 o’ clock, finish mounting Strip onto the rim.
- With a screwdriver or a similar tool, center Strip inside the rim channel.
- Add tubeless tyre, Caffélatex or Végétalex sealant, inflate, ride.
Lightweight
Being thin (0,8 mm) and strong, Strip only weighs 30 g (for S 26″/27,5″), making it weight-wise competitive with adhesive tubeless tapes (ranging between 9 and 20 g per wheel) and simply superior to old butyl tubeless rim strips (with limited strength and adding over 65 g per wheel). Weights(*) for a single Strip are:
- Strip S 26″/27,5″: 30 g
- Strip S 29″: 33 g
- Strip M 26″/27,5″: 36 g
- Strip M 29″: 39 g
- Strip L 26″/27,5″: 48 g
- Strip L 29″: 53 g
- Strip Plus S 26″/27,5″: 55 g
- Strip Plus S 29″: 58 g
- Strip Plus M 26″/27,5″: 68 g
- Strip Plus M 29″: 72 g
- Strip Plus L 26″/27,5″: 91 g
- Strip Plus L 29″: 95 g
(*) tolerance +/- 10% on nominal weight

Highly resistant to damage and puncture: The special polymer employed in its construction makes Strip highly resistant to damage and puncture. It’s also very stable from a chemical standpoint and cannot be damaged by Caffélatex or other non-chemically-aggressive tyre sealants.

WARNING: using sealants containing aggressive chemicals or ammonia, or cleaning the rim with aggressive chemical products can damage Caffélatex Tubeless Strip and may represent dangers to the user. We recommend using only Caffélatex or Végétalex sealants, or Espresso / Espresso Doppio inflate & repair cartridges with Caffélatex Tubeless Strip.
Long lasting: Something you can do with Strip that you simply can’t with adhesive tubeless tapes: moving Strip from one rim to another. 
As the Strip material is very durable, its lifespan can exceed the one of the rim it’s mounted on, and can it be removed and mounted on another rim. Strip can also be removed and mounted on the same rim if a spoke needs to be replaced.
Made in Italy.
Effetto Mariposa
Effetto Mariposa delivers premium bike maintenance products and tools, trusted by cyclists who demand precision and reliability. Known for their Caffélatex tubeless tyre sealant, torque wrenches, chain lubrication, and protective film kits, Effetto Mariposa combines Swiss engineering with Italian cycling passion. Whether you're racing, training, or commuting, their products ensure your bike runs at peak performance. Get top-quality sealants and maintenance gear from Effetto Mariposa at Hyper Ride with fast and reliable delivery.
Auckland Same Day Delivery
Live in Auckland? Get your order today with our Urgent Tonight service.
Excludes surfboards. Surfboards travel separately by specialist freight and are priced differently at checkout.
Available Monday to Friday, excluding public holidays. Delivered between 6:00pm and 9:00pm the same day.
Check the zone map below and look for the Urgent Tonight banner on eligible products.
We can deliver Hyper Ride warehouse orders to PO Boxes using NZ Post. Supplier-direct PO Box delivery depends on the supplier's nominated courier and we may contact you for a physical street address if required. We do not deliver to Great Barrier Island or the Chatham Islands. Rural deliveries may take an extra 1–3 working days.
Where Your Order Ships From
Hyper Ride Warehouse
Products showing "In Stock – Ships from Hyper Warehouse" are stocked at our Auckland warehouse and are normally dispatched within 1 business day, unless a different timeframe is shown on the product listing, at checkout, or in your order confirmation.
Supplier / Logistics Warehouse
Products showing "Ships Direct from Supplier", "Ships from logistics warehouse" or similar wording are dispatched directly from one of our suppliers. These items are normally dispatched within 1 working day unless a different processing timeframe is displayed.
Specific Dispatch Timeframes
Some products require extra processing time. For example, "Logistics Warehouse – Allow approx. 2 working days before dispatch" or "Aus Stock – Dispatch in approx. 7–10 working days". Where a specific timeframe is displayed against an item, that timeframe applies.
Dispatch Time vs Delivery Time
Dispatch time is the time required for your item to leave the Hyper Ride warehouse or supplier warehouse. Courier delivery time begins after the item has been dispatched.
The dispatch timeframe shown against the individual product on the product page, at checkout, or in your order confirmation takes priority over the general timeframes on this page.
If your order contains products from more than one dispatch location, your items may be sent separately and arrive at different times. Each parcel may also have a different courier and tracking number.
Shipping Rates
| Category | Cost | Delivery | Items |
|---|---|---|---|
| Street Clothing & Footwear | $9.99 | 1–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Street clothing and footwear. |
| Standard Nationwide | $14.99 | 2–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Most standard-sized items. |
| Medium Items | $19.99 per item | Standard delivery timeframe applies. | Bodyboards, board bags, longboard skateboards, moto boots, and moto helmets. |
| Large Items | $29.99 per item | Standard delivery timeframe applies. | Snowboards, snowboard packages, kneeboards, wakeboards, water skis, and bikes. |
| XLarge Items | $29.99 per item | Standard delivery timeframe applies. | Inflatable stand-up paddle boards. |
Bulky Items
Surfboards, Roof Boxes & Large Bike Racks
These items require specialist transport and are sent using Bascik rather than our standard NZ Post service. Delivery can take up to 10 days depending on your location within New Zealand.
Surcharges
We recommend delivery to a non-rural town or workplace if you would like to avoid the rural surcharge.
Due to additional courier surcharges. You may prefer delivery to a friend or workplace in Auckland City.
Additional Information
Rural Delivery
Rural deliveries can take an additional 1–3 working days. Exact delivery times can vary depending on the local rural courier route and service frequency.
Signature Required
Orders are sent signature required by default. If you provide permission to leave in your shipping notes, the courier may leave the parcel without a signature where their service allows.
PO Box Delivery
Orders shipped from our Auckland warehouse via NZ Post can be delivered to PO Boxes. Supplier-direct PO Box delivery depends on the supplier's nominated courier. If required, we may contact you for a physical street address.
Shipping Days
Orders are not dispatched on weekends or public holidays. Working-day dispatch and delivery estimates exclude weekends and public holidays.
Order Changes
Once an order has been placed, we cannot guarantee cancellations or edits before dispatch. Contact us as soon as possible and we will help where we can.
Tracking
For orders shipped from our Auckland warehouse, NZ Post tracking is automatically emailed once the courier collects and scans your parcel. Supplier-direct tracking is not always supplied automatically, so please contact us if your expected dispatch timeframe has passed and you have not received tracking.
Tracking & Split Orders
Hyper Ride Warehouse Tracking
Hyper Ride warehouse orders are shipped using NZ Post. Tracking is automatically forwarded to you once NZ Post collects and scans the parcel. Tracking may not show movement until the first courier scan has taken place.
Supplier Tracking
Supplier-direct orders use the supplier's nominated courier. Tracking details are not always automatically forwarded to us or to the customer. If the dispatch timeframe shown against your product has passed, email us and we can request the tracking for you.
Orders From Multiple Locations
If your order contains products from the Hyper Ride warehouse and one or more supplier warehouses, the items may be dispatched separately and arrive on different days.
Different Couriers
Split orders may use different courier companies and have separate tracking numbers. Please check the dispatch information shown against each item in your order confirmation.
Support & Freight
Freight Companies
- NZ Post is used for standard orders dispatched from the Hyper Ride Auckland warehouse.
- Bascik is used for specialist bulky freight including surfboards, roof boxes and large bike racks.
- Urgent Couriers operates our Auckland Urgent Tonight same-day delivery service.
- Orders dispatched directly from a supplier are sent using the supplier's nominated courier.
- Supplier-direct tracking is not always sent automatically. If you need tracking after the expected dispatch timeframe has passed, please contact our customer service team.
Shipping to Australia?
For Australian shipping information, head to our dedicated Shipping AU page.
We currently offer standard shipping only for Australia. All Australian orders are first received at our Auckland HQ, where they are collated and processed for export before dispatch.
$29.99 shipping plus a 2% import fee. The fee may vary depending on the item.
Estimated delivery time is 4–6 business days from dispatch.
Orders do not ship same-day. Processing and export prep can take up to 3 business days.
There are currently no express shipping options available for Australia.
We do not ship surfboards or stand-up paddleboards to Australia. We also cannot deliver to post shops or PO Boxes — a residential or business street address is required.
Shipping Overview
| Shipping Type | Cost | Delivery | Details |
|---|---|---|---|
| Australia Standard Nationwide | $25 + 2% import fee | 4–6 business days from dispatch (estimate only). | Orders are first collated at our Auckland HQ and processed for export before dispatch. Rural and remote areas may take longer. |
How Australian Orders Work
Order Processing
Orders do not ship same-day. All Australian orders first arrive at our Auckland HQ warehouse, where they are collated and processed for export. This can take up to 3 business days before dispatch.
Multiple Items
If your order contains multiple items, we’ll collate them at our Auckland HQ and ship them together so your order arrives in full.
Remote Areas
Delivery to rural or remote parts of Australia, including WA, NT, and Far North QLD, may take longer than the standard 4–6 business day estimate.
Dispatch Schedule
Orders are dispatched Monday to Friday, 8:00am–5:00pm NZ time. Our daily processing cut-off is 3:00pm NZ time. Orders placed after this, on weekends, or on public holidays will be processed the next business day.
Tracking, Customs & Returns
Tracking Your Order
You’ll automatically receive a Team Global Express tracking link once your parcel leaves Auckland and is scanned into the carrier network.
Customs & Duty Charges
International orders may be subject to customs or import duties once they reach Australia. These charges are the responsibility of the recipient. Hyper Ride cannot control, predict, or waive these fees, and we cannot mark orders as gifts.
Returns from Australia
Returns from Australia are not free. For full returns information, including how to lodge a return, please visit our Returns page.
Need Help?
Customer Support
For help with Australian shipping, tracking, or returns, email ridesupport@hyperride.co.nz.
Quick Summary
- Standard shipping only for Australia.
- Orders are collated at Auckland HQ before export.
- Dispatch can take up to 3 business days.
- Delivery is estimated at 4–6 business days from dispatch.
- Remote areas may take longer.
![EFFETTO MARIPOSA CAFFELATEX TUBELESS TAPE L - 29MM X 8M [SUITS INTERNAL RIM WIDTH 25-29MM]](https://cdn2.n2erp.co.nz/hyp_19sj232-ask2-dfk2-am29-89fkl348fd/images/products/main/kernelsalesimagesact_ar4msekd.1cu.png)
