Intention
Designed to provide a lively and energetic ride, Nipples will revitalize any setup for carving, pumping, dancing, freestyle and freeride.
Formula
Nipples are poured in our extremely high rebound Randy Urethane formula. We stumbled on this urethane a few years ago while testing ultra high rebound formulas for wheels, but we found this urethane to actually be too high rebound for a wheel urethane. Perfect for a bushing.
Specs & Features
- Outer diameter: 1 inch
- Height (top/roadside): 0.56 inch
- Height (bottom/boardside): 0.66 inch
The bottom bushing carries most of the rider’s weight, so it is compressed more than the top bushing. The top bushing engages mostly when the rider leans in one direction to turn. To account for this difference in loading, we made the bottom bushing slightly taller than the top. Both top and bottom barrels are beveled on one edge for a better fit with large cupped washers (such as the stock parts on Paris and Tracker Racetrack trucks). However, we recommend flat washers in general (see below).
The first round of Nipples are packaged in sets of four bushings (two bottom barrels and two top barrels) and include four flat washers. Each set of four will be sold for $16 (retail).
Hardness
The first release of Nipples will feature three hardness ratings: soft, medium, and hard. These are roughly equivalent to ratings of 85a, 87a, and 89a on the Shore A durometer scale. The reason we’ve chosen to use a relative hardness scale for our bushings is that Nipples feel and respond differently than many equivalently rated bushings, due to their dimensions. The Nipples feature a slightly larger-than-average diameter that is intended to provide more leverage against the hanger and more meaty volume to compress in every turn. Combined with a double barrel configuration, this allows for a predictable initiation and very consistent resistance throughout the hanger’s travel, even in softer durometers.
Recommended weight ranges for lower speed (under 20 mph) riding are below. For faster riding, we recommend going harder.
- Soft (orange): 80-180 lbs / 35-85 kg
- Medium (purple): 160-230 lbs / 70-105 kg
- Hard (yellow): 200-270 lbs / 90-125 kg
Washers
We tested many washer configurations while developing our bushings and ultimately found that flat washers on both sides provided the response we were looking for. We found, however, that most commercial flat washers we tested were lacking in one performance area or another. Some were made of soft materials that bent over time, and most did not have the kind of consistency in thickness from one washer to the next that we wanted (thicker washers not only modify the angle at which the hanger sits but also tend to result in excess compression and a deadened feeling). So we decided to develop our own flat washers.
Our washers feature a 1-inch outer diameter and are 0.055 inch thick. They are made of strong, medium-carbon steel that resists bending. The manufacturing tolerances are very tight, so dimensions are consistent between parts. The wide diameter and low thickness help support the entire bushing without degrading their performance or interfering with the truck’s geometry.
While the Nipples are packaged with our own flat washers, there are many other washer setups that can change the riding experience. For instance, large cupped washers can be used for a slightly more restrictive feel, while a flipped small cup washer on the top bushing will provide a slightly “looser” turning response.
Compatibility
Nipple bushings fit Paris, Tracker Fastrack, Gullwing Charger II, and old (pre-2010) Bear trucks. They are not compatible with new Bears, Gullwing Chargers, or Indys. Nipples work with Randal trucks, but they do not sit completely contained in the bushing seat. Since the Randal bushing seat is so low, however, it does not interfere with the performance of the bushings. They fit Caliber trucks, but the lean becomes very restricted past a certain point.
Many of our ambassadors have also run Nipples in various precision trucks (e.g. Aera and Omen) with good results.
This compatibility list is based on the trucks we use most. Nipples will fit in any truck that can accommodate a 1-inch diameter bushing with a height of 0.66 (bottom) and 0.56 (top) inch.
ORANGATANG
ORANGATANG is a leading brand in the longboarding community, known for its high-performance wheels and accessories. At Hyper Ride, we offer a variety of ORANGATANG longboard wheels that provide superior grip, speed, and durability, perfect for downhill racing, freeriding, and cruising. Whether you're looking to upgrade your current setup or build a new board, ORANGATANG's wheels are designed to enhance your riding experience. Get your ORANGATANG gear at Hyper Ride with fast and reliable delivery across New Zealand.
Auckland Same Day Delivery
Live in Auckland? Get your order today with our Urgent Tonight service.
Excludes surfboards. Surfboards travel separately by van and are priced differently at checkout.
Available Monday to Friday, excluding public holidays. Delivered between 6:00pm and 9:00pm the same day.
Check the zone map below and look for the Urgent Tonight banner on eligible products.
We do not deliver to PO boxes, Great Barrier Island, or the Chatham Islands. Rural deliveries may also take an extra 1–3 working days.
Shipping Rates
| Category | Cost | Delivery | Items |
|---|---|---|---|
| Street Clothing & Footwear | $9.99 | 1–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Street clothing and footwear. |
| Standard Nationwide | $14.99 | 2–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Most items excluding surfboards, soft top surfboards, wakeboards, waterskis, SUPs, and bikes. |
| Medium Items | $19.99 per item | Standard delivery timeframe applies. | Bodyboards, board bags, longboard skateboards, moto boots, and moto helmets. |
| Large Items | $29.99 per item | Standard delivery timeframe applies. | Snowboards, snowboard packages, kneeboards, wakeboards, water skis, and bikes. |
| XLarge Items | $29.99 per item | Standard delivery timeframe applies. | Inflatable stand-up paddle boards. |
Bulky Items
Surfboards, Roof Boxes & Large Bike Racks
These items require special transport arrangements. Delivery can take up to 10 days depending on location within New Zealand.
Surcharges
We recommend delivery to a non-rural town or workplace to avoid this surcharge.
Due to high courier surcharges. Consider delivering to a friend in Auckland City who can bring it out.
Additional Information
Rural Delivery Information
Delivery times for rural areas can vary depending on how often couriers service your location. Some rural deliveries may only be serviced once a week, so we recommend checking with your local rural courier if timing is important.
Order Changes
Once an order has been placed, we cannot process cancellations or edits.
Shipping Days
Orders are not shipped on weekends or public holidays.
Tracking
Need your tracking number? Email ridesupport@hyper.co.nz and we’ll help you out.
Support & Freight
Freight Companies
- Post Haste and Bascik are used for orders shipped from Hyper Ride warehouse.
- Orders sent directly from a supplier will be shipped using the supplier’s nominated courier.
Shipping to Australia?
For Australian shipping information, head to our dedicated Shipping AU page.
We currently offer standard shipping only for Australia. All Australian orders are first received at our Auckland HQ, where they are collated and processed for export before dispatch.
$25 shipping plus a 2% import fee. The fee may vary depending on the item.
Estimated delivery time is 4–6 business days from dispatch.
Orders do not ship same-day. Processing and export prep can take up to 3 business days.
There are currently no express shipping options available for Australia.
We do not ship surfboards or stand-up paddleboards to Australia. We also cannot deliver to post shops or PO Boxes — a residential or business street address is required.
Shipping Overview
| Shipping Type | Cost | Delivery | Details |
|---|---|---|---|
| Australia Standard Nationwide | $25 + 2% import fee | 4–6 business days from dispatch (estimate only). | Orders are first collated at our Auckland HQ and processed for export before dispatch. Rural and remote areas may take longer. |
How Australian Orders Work
Order Processing
Orders do not ship same-day. All Australian orders first arrive at our Auckland HQ warehouse, where they are collated and processed for export. This can take up to 3 business days before dispatch.
Multiple Items
If your order contains multiple items, we’ll collate them at our Auckland HQ and ship them together so your order arrives in full.
Remote Areas
Delivery to rural or remote parts of Australia, including WA, NT, and Far North QLD, may take longer than the standard 4–6 business day estimate.
Dispatch Schedule
Orders are dispatched Monday to Friday, 8:00am–5:00pm NZ time. Our daily processing cut-off is 3:00pm NZ time. Orders placed after this, on weekends, or on public holidays will be processed the next business day.
Tracking, Customs & Returns
Tracking Your Order
You’ll automatically receive a Team Global Express tracking link once your parcel leaves Auckland and is scanned into the carrier network.
Customs & Duty Charges
International orders may be subject to customs or import duties once they reach Australia. These charges are the responsibility of the recipient. Hyper Ride cannot control, predict, or waive these fees, and we cannot mark orders as gifts.
Returns from Australia
Returns from Australia are not free. For full returns information, including how to lodge a return, please visit our Returns page.
Need Help?
Customer Support
For help with Australian shipping, tracking, or returns, email ridesupport@hyper.co.nz.
Quick Summary
- Standard shipping only for Australia.
- Orders are collated at Auckland HQ before export.
- Dispatch can take up to 3 business days.
- Delivery is estimated at 4–6 business days from dispatch.
- Remote areas may take longer.
