Largest Wake Shaper face 14 x 18 inches = 252sq inch Patented Concave Water Channeling Wing Our concave channeling wing surface pushes more water to increase the length of the wave, while keeping the face super clean!
Super Strong Suction Cup Attachment Our 4.5 inch rubber suction cups won’t damage gel coat or leave black markings on your boat. Easy to adjust on the fly, No ugly Velcro or safety tethers required.
Made with Durable Rust Free Materials We Build the WakeSurf Edge with impact resistant, lite weight glass filled nylon 6.6. and rust free stainless steel hardware. Our shaper is long lasting; won’t rust or stain your boat.
Built In Flotation Don’t worry about your wake shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed air tight.
Make the most of the MEGA WAKE SURF EDGE , Recommended boat 21’ or longer, have a 325hp engine or greater, ese with FatSac water ballast systems. Level load your boat to keep the nose down for the captain’s visibility and a longer wake.
FAQ
- It will work on most inboard boats, though you should measure your boat to make sure. The suction cups need 4 1⁄2" of smooth, flat surface to attach to. If there is a lip/step above the attach-ment area on your hull that protrudes more than 5/8", then you will need 6 1⁄2" of smooth flat surface instead of 4 1⁄2". The suction cups can handle 1⁄4" of curvature over a 5" distance.
- Never surf behind an outboard or an inboard/outboard boat for safety reasons. We have not tested on such boats, and strongly discourage use on such boats.
- Yes, and in most cases, it will result a better wave than your stock built-in surf system. For surf systems with tabs that come out of the sides of the hull such as Malibu’s Surf GateTM, you will achieve best results by placing the Wakesurf Edge Shaper in front of the surf gate, but higher up on the hull. This way some water is deflected by both the Wakesurf Edge and the Surfgate, and you will see a noticeable increase in wave length. For surf systems that use tabs that flip down, you will see the best results by simply not using those tabs. These types of systems fight against the Wakesurf Edge Shaper when engaged.
- No! If installed properly, it will stay on all day, and never leave a mark on your hull!
- Each hull is a little different, and different results can be achieved by slightly changing the angle at which you attach your shaper, and by slightly changing the distance from the back of the boat where you attach it. Your ideal setup will be a matter of personal preference, so we recommend trying different positions and angles to find your favorite spot. Angling the nose of the shaper up can also help increase the length of the wave on some boats.
- Yes! It floats high enough in the water to spot it at a distance if it is dropped. If it is attached properly, it won’t come off, so this is rarely even an issue.
- Do Not tether! Part of making the best shaper in the world requires it to induce greater forces than other devices, and tethering it could cause it to slingshot back into the boat, causing damage or injury. If for some reason it ends up detached in the water, it floats well and can be retrieved easily.
- None of the aftermarket shapers work very well on jetboats due to the low draft and loose tracking of jetboat hulls.
- No. Jetskis are too small and too light to produce a large enough wave to surf, even with a Wakesurf Edge Shaper.
Aucklander's Same Day Delivery
- Live in Auckland? Get your order today with our Urgent Tonight Service.
- Cost: $19.99 (Excludes Surfboards. Surfboards go in a Van and are charged at completely different rate).
- Eligibility: Check your address here.
- Order Deadline: 2.30pm (Monday to Friday, excluding public holidays).
Here is an example of an item available for Urgent Tonight delivery Example note the Urgent banner on the right hand side
General Shipping Information
Please note that we do not deliver to PO boxes, Great Barrier Island, or the Chatham Islands.
Street Clothing and Footwear
- Cost: $9.99
- Delivery: 1-3 working days within New Zealand, plus 1-3 extra days for rural areas.
Standard Nationwide
- Cost: $14.99
- Delivery: 2-3 working days within New Zealand, plus 1-3 extra days for rural areas.
- Exceptions: Surfboards, Soft Top Surfboards, Wakeboards, Waterskis, SUPs, and Bikes.
Larger Items
- Medium: $19.99 per item (Bodyboards, Board Bags, Longboard Skateboards, Moto Boots, and Moto Helmets).
- Large: $29.99 per item (Snowboards, Snowboard Packages, Kneeboards, Wakeboards, Water Skis, and Bikes).
- XLarge: $29.99 per item (Inflatable Stand-Up Paddle Boards).
Auckland Central - Urgent Tonight
- Cost: $19.99 (Excludes Surfboards)
- Delivery: Orders placed between 8am-2.30pm will be delivered between 6pm-9pm on the same day.
- Area Coverage: Auckland Metro area, check your eligibility here.
- Availability: Monday to Friday.
Bulky Items (Surfboards, Roof Boxes, Large Bike Racks)
- Delivery Time: Up to 10 days based on location within New Zealand.
- Cost: Auckland $29, Rest of the North Island $69, South Island $99.
- Note: Surfboards, Roof Boxes, and Large Bike Racks require special transport arrangements.
Rural Delivery Surcharge
- Surcharge: $9.99 for any rural delivery.
- Note: We recommend delivery to a non-rural town or workplace to avoid this surcharge.
Waiheke Island Delivery Surcharge
- Surcharge: $30 due to high courier surcharges.
- Recommendation: Consider delivering to a friend in Auckland City who can bring it out.
Additional Information
- Rural Delivery Information: Please be aware that delivery times for rural areas may vary based on the frequency of service in your specific location. Rural couriers may visit some areas once a week. To ensure accurate delivery information for your rural address, we recommend contacting your local rural courier service.
- Order Cancellations: We cannot process cancellations once an order is placed.
- Shipping Times: No weekend or public holiday shipments.
- Tracking: Email us at ridesupport@hyper.co.nz for your tracking number.
- Contact Us: Phone Support: 0800 855 788, Email: ridesupport@hyper.co.nz
Freight Companies
- Post Haste and Mainfreight for most shipments. Track your order at:
- Post Haste
- Mainfreight for bulky items.
Australia
- For shipping information on Australian orders, click here.
Please note that we do not ship surfboards or stand-up paddleboards to Australia.
Also we do not deliver to post shops and post office boxes. We require a physical business or residential delivery address.
Australia Standard Nationwide
- Cost: $19.99 + 2% import fee (may differ based on the item).
- Delivery Time: 4-6 business days. (please note this is an estimate)
At Hyper Ride, we are committed to delivering your order as swiftly as possible. All our Australian shipments are handled by Team Global Express.
Shipping Schedule
All products are dispatched during normal business hours (Monday to Friday, 8 am to 5 pm). Please note that our daily order cutoff time is 3 PM NZ time. Orders placed outside of business hours, during public holidays, and on weekends will be processed on the next business day, as courier companies do not operate during those times.
Tracking Your Order
Once your parcel is scanned by Team Global Express, you will automatically receive a tracking link at the email address you provided with your order. To track your shipment with Team Global Express, please visit https://www.myteamge.com/
Customs and Duty Charges
For international orders, it's essential to be aware of potential customs or import duties. These charges are applied when the parcel reaches its destination country and are the responsibility of the recipient. Hyper Ride has no control over these fees and cannot predict their amount. We cannot be held responsible for any additional charges incurred, nor can we accept a return in such cases. As an established and ethical business, we do not engage in illegal practices such as marking international orders as gifts to bypass or reduce customs fees.
If you have any questions or need assistance, please contact our support team at ridesupport@hyper.co.nz.
